5.4 Lantastic

5 Other types of network

You need to specify ISO packets in the !PC.!NetRun file,for example:

  RMEnsure PCNE2 1.83  RMLoad <Diva$Dir>.PCNE2 -pISO

In order to make Lantastic 6.0 work with Network Links:

Move the whole Lantastic network over to IEEE 802.3 frames and IPXpackets by using the IEEE parameter with the card driver, and theIPX_ROUTING parameter with AILANBIOS, so;
```
NEX000 IEEE (or whatever card is in use)AILANBIO @STARTNET.CFG IPX_ROUTINGREDIR [machine name, etc.]
```
You must change every machine in the network.
Use i) MS-DOS not PC-DOS, and ii) the Novell ODI drivers for theAcorn machine. The load sequence is;
```
LSLNE2000AI-ODI IPX_ROUTINGAILANBIO @STARTNET.CFG IPX_ROUTINGREDIR [machine name, etc]
```

The NET.CFG should read:

  LINK DRIVER NE2000        INT 5        PORT 340        FRAME ETHERNET_802.3  PROTOCOL AI-ODI        BIND #1

This Lantastic network has been tested with the following softwarecomponent versions: